How to make a program for one time cutting with wire EDM machine?

1.     Making a drawing with CAXA (CAD), like a circle.

2.     Trajectory generation,

2.1 You need to set cut parameter as following picture, and then click OK.

(Note: If you choose Automatic compensation and set Offset value<0.1-0.105mm> here, do not set it at the Code convert any more. Otherwise, please do not set Offset value here, just set it at the Code convert. )

2.2 Choose the cutting direction by click any arrow as following:

2.3  Choose the offset direction by clicking any arrow as following:

2.4  The Circle Trajectory is generated now.

3.     3B Code generation and save the 3B code file by renaming it.

3.1 Save the 3B code file to your computer by naming it.

3.2 3B code file as following:

(Please choose Compact instruction format for the new machine first time usage as following):

4.     Enter File Manage → Load file,( above renamed 3B code file)

4.1 Choose the file from the computer

5.     Code Convert interface will automatically open. Click Code Convert and Exit buttons.

(Note: each time, you must click “Code Convert” and “Exit” buttons when this window appears).

6.     Set the E code according to your work piece requirement, and click “Change” button.

7.     Click the button “” to Simulate the programming or cut it.